NCBI Logo
GEO Logo
   NCBI > GEO > Accession DisplayHelp Not logged in | LoginHelp
GEO help: Mouse over screen elements for information.
          Go
Sample GSM1363194 Query DataSets for GSM1363194
Status Public on Apr 07, 2014
Title Sexual_Plant3-Cy5
Sample type genomic
 
Channel 1
Source name Sexual_Plant3_CGH
Organism Boechera stricta
Characteristics ipk-plant id: B10-839
name: Sex-3
es numbera: ES 555
species: B. stricta
reproduction: Sexual
locality: Sagebrush Meadow
u.s. state: MT
Extracted molecule genomic DNA
Extraction protocol Genomic DNA (gDNA) was extracted from the leaf tissue of a single plant of each of the 20 genotypes using a modified CTAB method described by Mace et al. (2003). Plant Mol. Biol. Report 21:459a-459h.
Label Cy5
Label protocol DNA with concentrations between 450 ng/μl and 1.0 μg/μl and absorbance readings of A260/A280 > 1.8 and A260/A230 > 1.9 (recommended by Roche-NimbleGen) were used for the labeling procedure. A total of 1.0 µg of gDNA per sample was used for each labeling reaction and hybridization thereafter. A dye swap experimental design was used for technical replication, where both test and reference samples are interchangeably labeled with the two dyes (Cy3 and Cy5; following Roche-NimblGen standard protocols) in order to minimize error due to dye-bias. A pooled reference sample was used, whereby an equal concentration of gDNA from each of the 20 genotypes was combined as a reference in each labeling reaction and hybridization (Scherer et al. 2007, Nat. Genet. 39:S7–S15.; Ju et al. 2010, Nucleic Acids Res. 1–11, doi:10.1093/nar/gkq730).
 
Channel 2
Source name pooled reference sample (mixture of different genotypes)
Organisms Boechera stricta; Boechera lignifera; Boechera divaricarpa; Boechera crandallii; Boechera retrofracta; Boechera schistacea; Boechera polyantha; Boechera retrofracta x Boechera stricta; Boechera duchesnensis
Characteristics reference: mixture of all 20 genotypes
Extracted molecule genomic DNA
Extraction protocol Genomic DNA (gDNA) was extracted from the leaf tissue of a single plant of each of the 20 genotypes using a modified CTAB method described by Mace et al. (2003). Plant Mol. Biol. Report 21:459a-459h.
Label Cy3
Label protocol DNA with concentrations between 450 ng/μl and 1.0 μg/μl and absorbance readings of A260/A280 > 1.8 and A260/A230 > 1.9 (recommended by Roche-NimbleGen) were used for the labeling procedure. A total of 1.0 µg of gDNA per sample was used for each labeling reaction and hybridization thereafter. A dye swap experimental design was used for technical replication, where both test and reference samples are interchangeably labeled with the two dyes (Cy3 and Cy5; following Roche-NimblGen standard protocols) in order to minimize error due to dye-bias. A pooled reference sample was used, whereby an equal concentration of gDNA from each of the 20 genotypes was combined as a reference in each labeling reaction and hybridization (Scherer et al. 2007, Nat. Genet. 39:S7–S15.; Ju et al. 2010, Nucleic Acids Res. 1–11, doi:10.1093/nar/gkq730).
 
 
Hybridization protocol A total of 1.0 µg of gDNA per sample was used for each labeling reaction and hybridization thereafter. A dye swap experimental design was used for technical replication, where both test and reference samples are interchangeably labeled with the two dyes (Cy3 and Cy5; following Roche-NimblGen standard protocols) in order to minimize error due to dye-bias. A pooled reference sample was used, whereby an equal concentration of gDNA from each of the 20 genotypes was combined as a reference in each labeling reaction and hybridization (Scherer et al. 2007, Nat. Genet. 39:S7–S15.; Ju et al. 2010, Nucleic Acids Res. 1–11, doi:10.1093/nar/gkq730).
Scan protocol After hybridization, washing and drying (following the manufacturer’s protocols; Roche-NimblGen) the arrays were scanned at 2 µm double pass resolution with an Agilent Microarray G2565BA Fluorescent Scanner (Agilent Technologies). Each 3-plex image (3x720K) was split into three separate arrays and aligned for data extraction using the NimbleScan software (version 2.6; Roche-NimblGen). The NimbleScan software performs spatial correction of the data, thereby reducing artifacts and noise before applying q-spline fit normalization (Workman et al. 2002). Data in *unavg_segMNT.gff files represent raw data as coming from the NimbleScan software.
Data processing For the dye-swap experimental design, two CGH profiles (Cy3 and Cy5) were obtained, each representing the log2-ratios of measured fluorescence intensities for the test (sexual or apomictic genotype; Table 1) versus reference sample (mixture of different genotypes, see above) for all 719 346 probes on the array (720K minus control probes). Genome-wide CGH-profiles of each genotype were normalized by applying quantile normalization (Bolstad et al. 2003) to both CGH profiles from the dye swap.
All normalized CGH profiles were analyzed by a mixture model of three Gaussian distributions described in Seifert et al. (2012, PLoS Comp. Biol. 8: doi: 10.1371/journal.pcbi.1002286 ) to identify depletions, enrichment and unchanged regions between a test genotype and the reference sample by specifically adapting the parameters of the mixture model to both CGH profiles of each test genotype using a Bayesian Expectation Maximization (EM) algorithm. Identification of depleted, unchanged, and enriched regions was done by performing a decoding of the measured log2-ratios into the most likely underlying state of each probe (depleted, unchanged, or enriched). Only probes that were identified as depleted or enriched in both CGH profiles (dye swap replicates) of a test sample (genotype) were considered as being depleted or enriched in this genotype, while all other probes were considered as being unchanged (i.e. no CNV variation with respect to the pooled reference). This resulted in a reproducible set of genomic regions affected by depletions or enrichment for each genotype.
 
Submission date Apr 04, 2014
Last update date Apr 07, 2014
Contact name Timothy Sharbel
E-mail(s) sharbel@ipk-gatersleben.de
Phone +49394825608
Organization name IPK Gatersleben
Street address Corrensstrasse 4
City Gatersleben
ZIP/Postal code 06466
Country Germany
 
Platform ID GPL17827
Series (1)
GSE51596 CNV in sexual and apomictic Boechera

Data table header descriptions
ID_REF
VALUE Quantile normalized log2-ratios of measured fluorescence intensities for the test (sexual or apomictic genotype) versus reference sample (mixture of different genotypes)

Data table
ID_REF VALUE
CONSENSUS454FS000000001 0.28158
CONSENSUS454FS000000073 -0.882415
CONSENSUS454FS000000284 -0.090145
CONSENSUS454FS000000484 -0.3877775
CONSENSUS454FS000000730 -1.23329
CONSENSUS454FS000000796 0.4992775
CONSENSUS454FS000000868 1.104005
CONSENSUS454FS000001044 -0.089965
CONSENSUS454FS000001114 0.13166
CONSENSUS454FS000001180 -0.06803
CONSENSUS454FS000001398 -0.04913
CONSENSUS454FS000001631 0.24126
CONSENSUS454FS000001697 0.17121
CONSENSUS454FS000001886 0.191105
CONSENSUS454FS000002092 -2.533375
CONSENSUS454FS000002162 -2.604255
CONSENSUS454FS000002224 -1.264755
CONSENSUS454FS000002292 -2.736745
CONSENSUS454FS000002350 -3.810645
CONSENSUS454FS000002535 -0.436

Total number of rows: 719345

Table truncated, full table size 22593 Kbytes.




Supplementary file Size Download File type/resource
GSM1363194_Sex-3-Cy5-US91603673A02_451272_SLOT01_S01_unavg_segMNT.gff.gz 6.9 Mb (ftp)(http) GFF
Processed data included within Sample table

| NLM | NIH | GEO Help | Disclaimer | Accessibility |
NCBI Home NCBI Search NCBI SiteMap