A noninvasive method to estimate arterial impedance by means of assessment of local diameter change and the local center-line blood flow velocity using ultrasound

Ultrasound Med Biol. 1996;22(7):895-905. doi: 10.1016/0301-5629(96)00082-8.

Abstract

Vascular impedance is defined as the ratio between the frequency components of the local blood pressure waveform and those of the local blood volume flow waveform. Assessment of vascular impedance is, for example, important to study heart load and distal vascular bed vasomotricity. However, only a few studies on vascular impedance have been performed in humans because pulsatile pressure and volume flow waveforms, simultaneously recorded at the same location, are difficult to obtain noninvasively. The noninvasive assessment of arterial impedance as described in this study is based on the replacement of the pressure waveform by the distension (change in diameter) waveform and the volume flow waveform by the center-line blood flow velocity waveform. Both waveforms can simultaneously and accurately be assessed by means of pulsed ultrasound. It will be shown that, depending on the Womersley number, the volume flow waveform may be replaced by the center-line blood flow velocity waveform for a given frequency range and that the pressure waveform may be replaced by the distension waveform for a wide frequency range. The validation of the proposed ultrasound method was performed through an in vitro study in a flow model with a distensible tube terminated with a hydraulic load (modified windkessel model). It is shown that, in vitro, the proposed method gives the same results as the local spectral pressure-flow relationship.

MeSH terms

  • Arteries / diagnostic imaging
  • Arteries / physiology*
  • Blood Flow Velocity*
  • Blood Pressure*
  • Models, Structural
  • Ultrasonography, Doppler, Pulsed*
  • Vascular Resistance