Cell pellets were suspended in 1 ml TRIzol reagent (GIBCO BRL) and transferred to 2-ml screw cap tubes containing 0.5 ml 0.1-mm diameter zirconia/silica beads (BioSpec Products).
Growth protocol
Clinical isolate 1254, 7H9 medium (supplemented with BSA, NaCl, glucose, and glycerol), 250-ml vented tissue culture flasks, 90 rpm shaking, and a starting culture density of OD 0.15 were used, unless otherwise indicated. RNA samples isolated from OD 0.15 cultures of the M. tuberculosis strain being assayed on the same day were used for the reference sample in each experiment. Cells were collected with a 4-min centrifugation step and frozen on dry ice.
Extracted molecule
total RNA
Extraction protocol
Cell debris was separated by a 45-s centrifugation. The supernatant was transferred to 2-ml Heavy Phase Lock Gel I tubes (Eppendorf) containing 300 ul chloroform, inverted rapidly for 15 s, and incubated 2 min. Samples were centrifuged for 5 min, and the aqueous phase was added to 270 ul isopropanol, followed by addition of 270 ul of the following mixture: 0.8 M sodium citrate and 1.2 M NaCl. Samples were incubated for 10 min at 4 C and centrifuged for 15 min at 4 C. The RNA pellets were washed with 1 ml 75% ethanol, centrifuged 5 min, and air-dried. After suspension of the RNA pellets in 90 ul water, 10 ul DNase I 10x buffer, and 6 U DNase I (Ambion) were added, and the samples were incubated for 30 min. Final purification of RNA was by RNeasy column (QIAGEN).
Label
Cy3
Label protocol
Both a PCR gene product microarray and a 70-mer oligonucleotide-based microarray (tuberculosis oligonucleotide set; QIAGEN) were used. Labeled cDNA was prepared as follows: 2 ug total RNA and 4.4ug of random oligonucleotide hexamers were incubated for 2 min at 98 C, cooled on ice, combined with Stratascript RTase buffer, 0.5 mM dA,G,CTP, 0.02 mM dTTP, 1.5 nmol Cy3 or Cy5-dUTP (Amersham Biosciences), and 1.8 ul Stratascript RTase (Stratagene) in a total volume of 25 ul, and incubated for 10 min at 25 C and 90 min at 42 C. cDNA was purified by microcon-10 (Amicon) filtration.
strain name: 1254 (wild_type) treatment: 0.5mM of diethylenetriamine/nitric oxide for 2 hours
Treatment protocol
Cell pellets were suspended in 1 ml TRIzol reagent (GIBCO BRL) and transferred to 2-ml screw cap tubes containing 0.5 ml 0.1-mm diameter zirconia/silica beads (BioSpec Products).
Growth protocol
Clinical isolate 1254, 7H9 medium (supplemented with BSA, NaCl, glucose, and glycerol), 250-ml vented tissue culture flasks, 90 rpm shaking, and a starting culture density of OD 0.15 were used, unless otherwise indicated. RNA samples isolated from OD 0.15 cultures of the M. tuberculosis strain being assayed on the same day were used for the reference sample in each experiment. Cells were collected with a 4-min centrifugation step and frozen on dry ice.
Extracted molecule
total RNA
Extraction protocol
Cell debris was separated by a 45-s centrifugation. The supernatant was transferred to 2-ml Heavy Phase Lock Gel I tubes (Eppendorf) containing 300 ul chloroform, inverted rapidly for 15 s, and incubated 2 min. Samples were centrifuged for 5 min, and the aqueous phase was added to 270 ul isopropanol, followed by addition of 270 ul of the following mixture: 0.8 M sodium citrate and 1.2 M NaCl. Samples were incubated for 10 min at 4 C and centrifuged for 15 min at 4 C. The RNA pellets were washed with 1 ml 75% ethanol, centrifuged 5 min, and air-dried. After suspension of the RNA pellets in 90 ul water, 10 ul DNase I 10x buffer, and 6 U DNase I (Ambion) were added, and the samples were incubated for 30 min. Final purification of RNA was by RNeasy column (QIAGEN).
Label
Cy5
Label protocol
Both a PCR gene product microarray and a 70-mer oligonucleotide-based microarray (tuberculosis oligonucleotide set; QIAGEN) were used. Labeled cDNA was prepared as follows: 2 ug total RNA and 4.4ug of random oligonucleotide hexamers were incubated for 2 min at 98 C, cooled on ice, combined with Stratascript RTase buffer, 0.5 mM dA,G,CTP, 0.02 mM dTTP, 1.5 nmol Cy3 or Cy5-dUTP (Amersham Biosciences), and 1.8 ul Stratascript RTase (Stratagene) in a total volume of 25 ul, and incubated for 10 min at 25 C and 90 min at 42 C. cDNA was purified by microcon-10 (Amicon) filtration.
Hybridization protocol
10 ul of hybridization solution (labeled cDNA, 5 ug tRNA, 3.8x SSC, 0.27% SDS) was sealed under a coverslip with rubber cement and hybridized overnight at 65 C for the DNA microarray. Oligonucleotide microarrays were first prehybridized for 1 h in 5x SSC, 1% BSA, and 0.1% SDS and washed with H2O and isopropanol. After the prehybridization, 10 ul of hybridization solution (labeled cDNA, 5 ug tRNA, 2x SSC, 25% formamide, and 0.1% SDS) was hybridized overnight at 54 C.
Scan protocol
Microarrays were scanned using a GenePix 4000A (Axon Instruments, Inc.). The intensities of the two dyes at each spot were quantified using ScanAlyze (M. Eisen, Lawrence Berkeley National Lab, Berkeley, CA).
Median intensities of background pixels of Cy3.; Type: integer; Scale: linear_scale; Channel: Cy3 Channel
CH2B_MEDIAN
Median intensities of background pixels of Cy3.; Type: integer; Scale: linear_scale; Channel: Cy5 channel
CH1D_MEAN
The mean feature pixel intensity with the median background subtracted (channel 1).; Type: integer; Scale: linear_scale; Channel: Cy3 Channel
CH2D_MEAN
The mean feature pixel intensity with the median background subtracted (channel 2).; Type: integer; Scale: linear_scale; Channel: Cy5 channel
CH1B_MEAN
Mean intensities of background pixels of Cy3.; Type: integer; Scale: linear_scale; Background
CH2B_MEAN
Mean intensities of background pixels of Cy5.; Type: integer; Scale: linear_scale; Background
PERGTBCH1I_1SD
The percentage of feature pixels with intensities more than one standard deviation above the background pixel intensity, at wavelength 532 nm.; Type: integer; Scale: linear_scale
PERGTBCH2I_1SD
The percentage of feature pixels with intensities more than one standard deviation above the background pixel intensity, at wavelength 635 nm.; Type: integer; Scale: linear_scale
PIX_RAT2_MEDIAN
Contains median of Ch2PI-CH2B/Ch1PI-CH1B where Ch1PI & Ch2PI represent single pixel intensities.; Type: float; Scale: linear_scale
TOT_SPIX
Count of the number of pixels in the spot.; Type: integer; Scale: linear_scale
TOT_BPIX
Number of background pixels.; Type: integer; Scale: linear_scale
REGR
The regression ratio of every pixel in a 2-feature-diameter circle around the center of the feature.; Type: float; Scale: linear_scale
CORR
The correlation between channel1 (Cy3) & Channel 2 (Cy5) pixels within the spot, and is a useful quality control parameter. Generally, high values imply better fit & good spot quality.; Type: float; Scale: linear_scale
User defined spot flag (default 0).; Type: integer; Scale: linear_scale
CH2IN_MEAN
Normalized value of mean Channel 2 (usually 635 nm) intensity (CH2I_MEAN/Normalization factor).; Type: integer; Scale: linear_scale; Channel: Cy5 channel
CH2BN_MEDIAN
Normalized value of median Channel 2 (usually 635 nm) background (CH2B_MEDIAN/Normalization factor).; Type: integer; Scale: linear_scale; Channel: Cy5 channel; Background
CH2DN_MEAN
Normalized value of mean Channel 2 (usually 635 nm) intensity with normalized background subtracted (CH2IN_MEAN - CH2BN_MEDIAN).; Type: integer; Scale: linear_scale; Channel: Cy5 channel
RAT2N_MEAN
Type: float; Scale: linear_scale
RAT1N_MEAN
Ratio of the means of Channel 1 (usually 532 nm) intensity to normalized Channel 2 (usually 635 nm) intensity with median background subtracted (CH1D_MEAN/CH2DN_MEAN). Channel 1/Channel 2 ratio normalized or Green/Red ratio normalized.; Type: float; Scale: linear_scale
VALUE
Log (base 2) of the ratio of the mean of Channel 2 (usually 635 nm) to Channel 1 (usually 532 nm) [log (base 2) (RAT2N_MEAN)].; Type: float; Scale: log_base_2
