 |
 |
GEO help: Mouse over screen elements for information. |
|
| Status |
Public on Jan 17, 2011 |
| Title |
UP07448_H3K27ME124439_N2_EEMB extraction1_array1 channel_1 |
| Sample type |
genomic |
| |
|
| Channel 1 |
| Source name |
UP07448_H3K27ME124439_N2_EEMB extraction1_array1 channel_1
|
| Organism |
Caenorhabditis elegans |
| Characteristics |
strain: N2
developmental stage: Early Embryo
genotype: wild type
Sex: mixed Male and Hermaphrodite population
|
| Growth protocol |
Worm_embryo_growth_and_harvest_vSS4. Embryos were prepared by bleaching from gravid N2 adults grown in standard S-basal media liquid culture. Live embryos were cross-linked in M9 + 1.85% formaldehyde for 30 minutes at room temperature. Embryos were then washed twice with M9 Buffer, once with 100 mM Tris-HCl pH 7.5 and once with FA buffer (50 mM HEPES/KOH pH 7.5, 1 mM EDTA, 1% Triton X-100, 0.1% sodium deoxycholate, 150 mM NaCl). Pellets were frozen at -80C. For a detailed protocol see http://www.modencode.org/.
|
| Extracted molecule |
genomic DNA |
| Extraction protocol |
Worm_embryo_extraction_vSS2. Embryos were resuspended in FA buffer (50 mM HEPES/KOH pH 7.5, 1mM EDTA, 1% Triton X-100, 0.1% sodium deoxycholate; 150 mM NaCl) + protease inhibitors. Sample was dounced 30 times using tight pestle at 4ºC, then sonicated 9 times on ice at the following settings: 30 sec; power output 3; 70% duty cycle. Cell debris was removed by centrifuging at 13,000 rpm for 15 minutes at 4ºC and taking the supernatant. Supernatants were filtered through Millipore Ultrafree-MC 0.45 ?m filter units (cat. UFC30HV0S) at 13,000 rpm, 4°C for 1 minute to remove lipids. Protein concentration was determined, and extracts were aliquoted and stored at -80ºC. For a detailed protocol see http://www.modencode.org/.
Worm_chromatin_immunoprecipitation_vSS4. 0.3-3 mg extract + 1% sarkosyl was used for each ChIP with 10% taken as input directly into elution buffer (1% SDS in TE, 250 mM NaCl). Antibody was added to each IP sample and incubated overnight at 4ºC. Immune complexes were incubated (2 hrs at 4ºC) with 50 ?l of IgG dynabeads (Dyna), and washed 5 minutes with 1.5 mL of each of the following solutions: ChIP Buffer, ChIP Buffer + 1 M NaCl, ChIP Buffer + 500 mM NaCl, TEL Buffer (10 mM Tris-HCl pH 8.0, 250 mM LiCl, 1% NP-40, 1% sodium deoxycholate, 1 mM EDTA), and 2X TE (10 mM Tris-HCl pH 8.0, 1 mM EDTA). Samples were eluted twice with 150 ?L elution buffer for 15 minutes at 65ºC. Samples were treated with RNAse for 30 minutes at 37ºC. Samples were treated with proteinase K at 55ºC for 1-2 hrs then transfer to 65ºC overnight to reverse crosslinks. DNA was cleaned up using Zymo kit. For a detailed protocol see http://www.modencode.org/.
Worm_LM-PCR_Amplification_for_ChIP-chip_vSS2. ChIP DNA was amplified with a modified ligation mediated PCR (LM-PCR) protocol derived from FlyChip protocol version 1.2 from R. Auburn: http://www.flychip.org.uk/protocols/chip/lm_pcr.php. For a detailed protocol see http://www.modencode.org/.
|
| Label |
Cy3 dye
|
| Label protocol |
ChIP-chip_label_hyb_nimblegen_v1. DNA was labeled and hybridized to C. elegans tiling array by Roche NimbleGen according to the protocol described in chapter 3 and 4 of the NimbleGen Arrays User?s Guide ChIP-chip Analysis, Version 3.1, 27 May 2008. Briefly, Amplified IP or input DNA was either labeled with Cy5 or Cy3 in the presence of Klenow fragment. The reaction was stopped by the addition of EDTA. Labeled DNA was recovered by isopropanol precipitation, and dried. The labeled DNA was hybridized to C. elegans tiling array for 16 - 20 hours at 42°C.
|
| |
|
| Channel 2 |
| Source name |
UP07448_H3K27ME124439_N2_EEMB extraction1_array1 channel_2
|
| Organism |
Caenorhabditis elegans |
| Characteristics |
strain: N2
developmental stage: Early Embryo
genotype: wild type
Sex: mixed Male and Hermaphrodite population
|
| Growth protocol |
Worm_embryo_growth_and_harvest_vSS4. Embryos were prepared by bleaching from gravid N2 adults grown in standard S-basal media liquid culture. Live embryos were cross-linked in M9 + 1.85% formaldehyde for 30 minutes at room temperature. Embryos were then washed twice with M9 Buffer, once with 100 mM Tris-HCl pH 7.5 and once with FA buffer (50 mM HEPES/KOH pH 7.5, 1 mM EDTA, 1% Triton X-100, 0.1% sodium deoxycholate, 150 mM NaCl). Pellets were frozen at -80C. For a detailed protocol see http://www.modencode.org/.
|
| Extracted molecule |
genomic DNA |
| Extraction protocol |
Worm_embryo_extraction_vSS2. Embryos were resuspended in FA buffer (50 mM HEPES/KOH pH 7.5, 1mM EDTA, 1% Triton X-100, 0.1% sodium deoxycholate; 150 mM NaCl) + protease inhibitors. Sample was dounced 30 times using tight pestle at 4ºC, then sonicated 9 times on ice at the following settings: 30 sec; power output 3; 70% duty cycle. Cell debris was removed by centrifuging at 13,000 rpm for 15 minutes at 4ºC and taking the supernatant. Supernatants were filtered through Millipore Ultrafree-MC 0.45 ?m filter units (cat. UFC30HV0S) at 13,000 rpm, 4°C for 1 minute to remove lipids. Protein concentration was determined, and extracts were aliquoted and stored at -80ºC. For a detailed protocol see http://www.modencode.org/.
Worm_chromatin_immunoprecipitation_vSS4. 0.3-3 mg extract + 1% sarkosyl was used for each ChIP with 10% taken as input directly into elution buffer (1% SDS in TE, 250 mM NaCl). Antibody was added to each IP sample and incubated overnight at 4ºC. Immune complexes were incubated (2 hrs at 4ºC) with 50 ?l of IgG dynabeads (Dyna), and washed 5 minutes with 1.5 mL of each of the following solutions: ChIP Buffer, ChIP Buffer + 1 M NaCl, ChIP Buffer + 500 mM NaCl, TEL Buffer (10 mM Tris-HCl pH 8.0, 250 mM LiCl, 1% NP-40, 1% sodium deoxycholate, 1 mM EDTA), and 2X TE (10 mM Tris-HCl pH 8.0, 1 mM EDTA). Samples were eluted twice with 150 ?L elution buffer for 15 minutes at 65ºC. Samples were treated with RNAse for 30 minutes at 37ºC. Samples were treated with proteinase K at 55ºC for 1-2 hrs then transfer to 65ºC overnight to reverse crosslinks. DNA was cleaned up using Zymo kit. For a detailed protocol see http://www.modencode.org/.
Worm_LM-PCR_Amplification_for_ChIP-chip_vSS2. ChIP DNA was amplified with a modified ligation mediated PCR (LM-PCR) protocol derived from FlyChip protocol version 1.2 from R. Auburn: http://www.flychip.org.uk/protocols/chip/lm_pcr.php. For a detailed protocol see http://www.modencode.org/.
|
| Label |
Cy5 dye
|
| Label protocol |
ChIP-chip_label_hyb_nimblegen_v1. DNA was labeled and hybridized to C. elegans tiling array by Roche NimbleGen according to the protocol described in chapter 3 and 4 of the NimbleGen Arrays User?s Guide ChIP-chip Analysis, Version 3.1, 27 May 2008. Briefly, Amplified IP or input DNA was either labeled with Cy5 or Cy3 in the presence of Klenow fragment. The reaction was stopped by the addition of EDTA. Labeled DNA was recovered by isopropanol precipitation, and dried. The labeled DNA was hybridized to C. elegans tiling array for 16 - 20 hours at 42°C.
|
| |
|
| |
| Hybridization protocol |
ChIP-chip_label_hyb_nimblegen_v1. DNA was labeled and hybridized to C. elegans tiling array by Roche NimbleGen according to the protocol described in chapter 3 and 4 of the NimbleGen Arrays User?s Guide ChIP-chip Analysis, Version 3.1, 27 May 2008. Briefly, Amplified IP or input DNA was either labeled with Cy5 or Cy3 in the presence of Klenow fragment. The reaction was stopped by the addition of EDTA. Labeled DNA was recovered by isopropanol precipitation, and dried. The labeled DNA was hybridized to C. elegans tiling array for 16 - 20 hours at 42°C.
|
| Scan protocol |
ChIP-chip_scanning_nimblegen_v1. Array scanning and raw data extraction were performed at Roche NimbleGen, according to the protocol described in chapter 5 and 6 of the NimbleGen Arrays User?s Guide ChIP-chip Analysis, Version 3.1, 27 May 2008. Briefly, array signal was scanned by using a GenePix 4000B Scanner with associated software and saved as .tif files of the 532nm and 635nm images individually. Raw signal intensities of the images were extracted and saved as .pair files by using NimbleScan software according to the NimbleScan v2.4 User?s Guide.
|
| Description |
channel ch1 is input DNA;
channel ch2 is ChIP DNA; Antibody information listed below: official name: UP07448 H3K27me1:24439;target name: H3K27me1;host: Rabbit;antigen: peptide including monomethyl-lysine 27 of histone H3;clonal: Polyclonal;purified: Affinity;company: Upstate/Millipore;catalog: 07-448;short description: A rabbit polyclonal antibody to H3K27me1 obtained from Upstate (07-448 lot #24439). Used for ChIP.;
|
| Data processing |
ChIP-chip normalization standard MA2C:JL:2 protocol. ChIP-chip_normalization_standard_MA2C_v2. First, all the IP and INPUT log ratio values are read from the pairdata file. Secondly, we build GC bins for INPUT and IP based on the GC counts for every probe sequence, which means that the INPUT or IP values for any probes which have the same GC counts will be put together. After that, for each GC bin, we calculate the mean for IP and INPUT data, and the covariance between this two channels. By default, the robust mean variance method is applied, which generalizes Tukey's theory of bi-weight estimation where the constant C is set to 2. At last, we adjust the log ratio values for each probe by using the mean and covariance values for their corresponding GC bins, then these values are further normalized by their mean and standard derivation. In a single experiment, median within the sliding window defined by 2x bandwidth parameter is assigned as MA2C score at the center of each probe. In case of replicates, when we calculate the MA2Cscore afterwards, we take the median as the score from all the replicates for all the probes within the sliding window defined by 2x bandwidth parameter. Processed data are obtained using following parameters: genome version is WS190
|
| |
|
| Submission date |
Jan 17, 2011 |
| Last update date |
Feb 02, 2015 |
| Contact name |
DCC modENCODE |
| E-mail(s) |
help@modencode.org
|
| Phone |
416-673-8579
|
| Organization name |
Ontario Institute for Cancer Research
|
| Lab |
modENCODE DCC
|
| Street address |
MaRS Centre, South Tower, 101 College Street, Suite 800
|
| City |
Toronto |
| State/province |
Ontario |
| ZIP/Postal code |
M5G 0A3 |
| Country |
Canada |
| |
|
| Platform ID |
GPL8647 |
| Series (2) |
| GSE26178 |
Strome UP07448_H3K27ME124439_N2_EEMB |
| GSE26186 |
Broad chromosomal domains of histone modification patterns in C. elegans |
|
| Relations |
| Named Annotation |
GSM656310_UP07448_H3K27ME124439_N2_EEMB_1_OID26641_MA2Cscore.wig.gz |
| Supplementary file |
Size |
Download |
File type/resource |
| GSM656310_UP07448_H3K27ME124439_N2_EEMB_1_OID26641_17252801_532.pair.gz |
36.4 Mb |
(ftp)(http) |
PAIR |
| GSM656310_UP07448_H3K27ME124439_N2_EEMB_1_OID26641_17252801_635.pair.gz |
36.3 Mb |
(ftp)(http) |
PAIR |
| GSM656310_UP07448_H3K27ME124439_N2_EEMB_1_OID26641_MA2Cscore.wig.gz |
9.9 Mb |
(ftp)(http) |
WIG |
| GSM656310_UP07448_H3K27ME124439_N2_EEMB_1_OID26641_peaks.gff3.gz |
38.1 Kb |
(ftp)(http) |
GFF3 |
| Processed data provided as supplementary file |
| Processed data are available on Series record |
|
|
|
|
 |
