NCBI Logo
GEO Logo
   NCBI > GEO > Accession DisplayHelp Not logged in | LoginHelp
GEO help: Mouse over screen elements for information.
          Go
Sample GSM5630100 Query DataSets for GSM5630100
Status Public on Mar 11, 2022
Title sci-RNA-seq3 with mouse embryo atlas (deeper sequencing) sci3-me-001
Sample type SRA
 
Source name mouse embryos
Organism Mus musculus
Characteristics developmental stage: mouse embryo (E9.5, E10.5, E11.5, E12.5, E13.5)
strain: C57BL/6
Growth protocol The C57BL/6 mice were obtained from The Jackson Laboratory (Bar Harbor, ME) and plug matings were set up. Noon on the day of the vaginal plug was considered as embryonic day (E) 0.5. Dissections were done as previously described76 and all embryos were immediately snap frozen in liquid nitrogen. All animal procedures were in accordance with institutional, state, and government regulations (IACUC protocol 4378-01).
Extracted molecule polyA RNA
Extraction protocol Mouse embryos from different development stages were processed together to reduce batch effect. Each mouse embryo was minced into small pieces by blade in 1 mL ice-cold cell lysis buffer (10 mM Tris-HCl, pH 7.4, 10 mM NaCl, 3 mM MgCl2 and 0.1% IGEPAL CA-630 from77, modified to also include 1% SUPERase In and 1% BSA) and transferred to the top of a 40um cell strainer (Falcon). Tissues were homogenized with the rubber tip of a syringe plunger (5ml, BD) in 4ml cell lysis buffer. The filtered nuclei were then transferred to a new 15ml tube (Falcon) and pelleted by centrifuge at 500xg for 5min and washed once with 1ml cell lysis buffer. The nuclei were fixed in 4ml ice cold 4% paraformaldehyde (EMS) for 15min on ice. After fixation, the nuclei were washed twice in 1ml nuclei wash buffer (cell lysis buffer without IGEPAL), and re-suspended in 500ul nuclei wash buffer.
The samples were split to two tubes with 250ul in each tube and flash frozen in liquid nitrogen. We estimated the nuclei extraction efficiency based on extracted nuclei number vs. expected total nuclei number in each embryo and the nuclei extraction efficiency range from 60% to 85%. Thawed nuclei are permeabilized with 0.2% tritonX-100 (in nuclei wash buffer) for 3 minutes on ice, and briefly sonicated (Diagenode, 12s on low power mode) to reduce nuclei clumping. The nuclei were then washed once with nuclei wash buffer and filtered through 1ml Flowmi cell strainer (Flowmi).
Filtered nuclei were spun down at 500xg for 5min and resuspended in nuclei wash buffer. Nuclei from each mouse embryo were then distributed into several individual wells in four 96-well plates. The links between well id and mouse embryo were recorded for downstream data processing. For each well, 80,000 nuclei (16 µL) were mixed with 8 µl of 25 µM anchored oligo-dT primer (5′- /5Phos/CAGAGCNNNNNNNN[10bp barcode]TTTTTTTTTTTTTTTTTTTTTTTTTTTTTT-3′, where “N” is any base; IDT) and 2 µL 10 mM dNTP mix (Thermo), denatured at 55°C for 5 min and immediately placed on ice. 14 µL of first-strand reaction mix, containing 8 µL 5X Superscript IV First-Strand Buffer (Invitrogen), 2 µl 100 mM DTT (Invitrogen), 2 µl SuperScript IV reverse transcriptase (200 U/μl, Invitrogen), 2 μL RNaseOUT Recombinant Ribonuclease Inhibitor (Invitrogen), was then added to each well.
Reverse transcription was carried out by incubating plates by gradient temperature (4°C 2 minutes, 10°C 2 minutes, 20°C 2 minutes, 30°C 2 minutes, 40°C 2 minutes, 50°C 2 minutes and 55°C 10 minutes). After ligation reaction, 60µL nuclei dilution buffer (10 mM Tris-HCl, pH 7.4, 10 mM NaCl, 3 mM MgCl2 and 1% BSA) was added into each well. Nuclei from all wells were pooled together and spun down at 500xg for 10min. Nuclei were then resuspended in nuclei wash buffer and redistributed into another four 96-well plates with each well including 4µL T4 ligation buffer (NEB), 2µL T4 DNA ligase (NEB), 4µL Betaine solution (5M, Sigma-Aldrich), 6µL nuclei in nuclei wash buffer, 8µL barcoded ligation adaptor (100uM, 5’- GCTCTG[9bp or 10bp barcode A]/ideoxyU/ACGACGCTCTTCCGATCT[reverse complement of barcode A]-3’) and 16µL 40% PEG 8000 (Sigma-Aldrich). The ligation reaction was done at 16°C for 3 hours.
After RT reaction, 60µL nuclei dilution buffer (10 mM Tris-HCl, pH 7.4, 10 mM NaCl, 3 mM MgCl2 and 1% BSA) was added into each well. Nuclei from all wells were pooled together and spun down at 600xg for 10min. Nuclei were washed once with nuclei wash buffer and filtered with 1ml Flowmi cell strainer (Flowmi) twice, counted and redistributed into eight 96-well plates with each well including 2,500 nuclei in 5µL nuclei wash buffer and 5µL elution buffer (Qiagen).
1.33 μl mRNA Second Strand Synthesis buffer (NEB) and 0.66 μl mRNA Second Strand Synthesis enzyme (NEB) were then added to each well, and second strand synthesis was carried out at 16°C for 180 min. For tagmentation, each well was mixed with 11 μL Nextera TD buffer (Illumina) and 1 μL i7 only TDE1 enyzme (62.5nM, Illumina), and then incubated at 55°C for 5 min to carry out tagmentation. The reaction was then stopped by adding 24 μL DNA binding buffer (Zymo) per well and incubating at room temperature for 5 min. Each well was then purified using 1.5x AMPure XP beads (Beckman Coulter).
In the elution step, each well was added with 8µL nuclease free water, 1µL 10X USER buffer (NEB), 1µL USER enzyme (NEB) and incubated at 37°C for 15 min. Another 6.5µL elution buffer was added into each well. The AMPure XP beads were removed by magnetic stand and the elution product was transferred into a new 96-well plate. For PCR amplification, each well (16µL product) was mixed with 2μL of 10 μM indexed P5 primer (5′-AATGATACGGCGACCACCGAGATCTACAC[i5]ACACTCTTTCCCTACACGACGCTCTTCCGATCT-3′; IDT), 2 μL of 10 μM P7 primer (5′-CAAGCAGAAGACGGCATACGAGAT[i7]GTCTCGTGGGCTCGG-3′, IDT), and 20 μL NEBNext High-Fidelity 2X PCR Master Mix (NEB). Amplification was carried out using the following program: 72°C for 5 min, 98°C for 30 sec, 12-14 cycles of (98°C for 10 sec, 66°C for 30 sec, 72°C for 1 min) and a final 72°C for 5 min.
 
Library strategy RNA-Seq
Library source transcriptomic
Library selection cDNA
Instrument model Illumina NovaSeq 6000
 
Description sci-RNA-seq3 with mouse embryo atlas (deeper sequencing)
sci-RNA-seq3 library
Data processing Base calls were converted to fastq format using Illumina’s bcl2fastq/v2.20 and demultiplexed based on PCR i5 and i7 barcodes using maximum likelihood demultiplexing package deML (Renaud et al. 2015) with default settings. Downstream sequence processing and single cell digital expression matrix generation were similar to sci-RNA-seq (Cao et al. 2017) except that RT index was combined with hairpin adaptor index, and thus the mapped reads were split into constituent cellular indices by demultiplexing reads using both the RT index and ligation index (Levenshtein edit distance (ED) < 2, including insertions and deletions).
Briefly, demultiplexed reads were filtered based on RT index and ligation index (ED < 2, including insertions and deletions) and adaptor-clipped using trim_galore/v0.6.5 with default settings. Trimmed reads were mapped to the mouse reference genome (mm10) for mouse embryo nuclei, using STAR/v2.6.1d (Dobin et al. 2013) with default settings and gene annotations (GENCODE VM12 for mouse). Uniquely mapping reads were extracted, and duplicates were removed using the unique molecular identifier (UMI) sequence (ED < 2, including insertions and deletions), reverse transcription (RT) index, hairpin ligation adaptor index and read 2 end-coordinate (i.e. reads with UMI sequence less than 2 edit distance, RT index, ligation adaptor index and tagmentation site were considered duplicates).
Finally, mapped reads were split into constituent cellular indices by further demultiplexing reads using the RT index and ligation hairpin (ED < 2, including insertions and deletions). To generate digital expression matrices, we calculated the number of strand-specific UMIs for each cell mapping to the exonic and intronic regions of each gene with python/v2.7.13 HTseq package (Anders, Pyl, and Huber 2015). For multi-mapped reads, reads were assigned to the closest gene, except in cases where another intersected gene fell within 100 bp to the end of the closest gene, in which case the read was discarded. For most analyses we included both expected-strand intronic and exonic UMIs in per-gene single-cell expression matrices.
Genome_build: mm10
Supplementary_files_format_and_content: Processed data files include a cell annotation csv file, gene annotation csv file, and a gene count sparse matrix file (using scanpy.read_loom to open)
 
Submission date Oct 18, 2021
Last update date Mar 11, 2022
Contact name Chengxiang Qiu
E-mail(s) cxqiu@uw.edu
Organization name University of Washington
Department Genome Sciences
Lab Jay Shendure
Street address William H. Foege Hall, 3720 15th Ave NE
City Seattle
State/province WA
ZIP/Postal code 98195
Country USA
 
Platform ID GPL24247
Series (2)
GSE186068 Systematic reconstruction of the cellular trajectories of mammalian embryogenesis (deeper sequencing of E9.5-E13.5)
GSE186070 Systematic reconstruction of the cellular trajectories of mammalian embryogenesis
Relations
BioSample SAMN22372507
SRA SRX12674500

Supplementary data files not provided
SRA Run SelectorHelp
Raw data are available in SRA
Processed data are available on Series record

| NLM | NIH | GEO Help | Disclaimer | Accessibility |
NCBI Home NCBI Search NCBI SiteMap