 |
 |
GEO help: Mouse over screen elements for information. |
|
| Status |
Public on Jul 07, 2010 |
| Title |
UP07442_H3K9ME3_N2_EEMB_1 extraction1_array1 |
| Sample type |
genomic |
| |
|
| Channel 1 |
| Source name |
UP07442_H3K9ME3_N2_EEMB_1 extraction1_array1 channel_1
|
| Organism |
Caenorhabditis elegans |
| Characteristics |
strain: N2
developmental stage: Early Embryo
genotype: wild type
sex: mixed Male and Hermaphrodite population
|
| Growth protocol |
Worm_embryo_growth_and_harvest_vSS3. Embryos were prepared by bleaching from gravid N2 adults grown in standard S-basal media liquid culture. Live embryos were cross-linked in M9 + 1.85 % formaldehyde for 30 minutes at room temperature. Embryos were then washed twice with M9 Buffer, once with 100 mM Tris-HCl pH 7.5 and once with FA buffer (50 mM HEPES/KOH pH 7.5, 1 mM EDTA, 1% Triton X-100, 0.1% sodium deoxycholate, 150 mM NaCl). Pellets were frozen at -80C. For a detailed protocol see http://www.modencode.org/.
|
| Extracted molecule |
genomic DNA |
| Extraction protocol |
Worm_embryo_extraction_vSS2. Embryos were resuspended in FA buffer (50 mM HEPES/KOH pH 7.5, 1mM EDTA, 1% Triton X-100, 0.1% sodium deoxycholate; 150 mM NaCl) + protease inhibitors. Sample was dounced 30 times using tight pestle at 4ºC, then sonicated 9 times on ice at the following settings: 30 sec; power output 3; 70% duty cycle. Cell debris was removed by centrifuging at 13,000 rpm for 15 minutes at 4ºC and taking the supernatant. Supernatants were filtered through Millipore Ultrafree-MC 0.45 ?m filter units (cat. UFC30HV0S) at 13,000 rpm, 4°C for 1 minute to remove lipids. Protein concentration was determined, and extracts were aliquoted and stored at -80ºC. For a detailed protocol see http://www.modencode.org/.
Worm_chromatin_immunoprecipitation_v5. 2mg extract + 1%sarkosyl was used for each ChIP with 10% taken as input directly into elution buffer (1% SDS in TE, 250 mM NaCl) and treated with RNAse. Antibody was added to each IP sample and incubated overnight at 4C. Immune complexes were incubated (2hrs at 4C) with 50 ul of IgG dynabeads (Dyna), and washed 5 minutes with 1.5mL of each of the following solutions: ChIP Buffer, ChIP Buffer+1M NaCl, ChIP Buffer+500mM NaCl, TEL Buffer (10mM Tris-HCl pH 8.0, 250mM LiCl, 1% NP-40, 1% sodium deoxycholate, 1mM EDTA), and 2X TE (10mM Tris-HCl pH 8.0, 1mM EDTA). Samples were eluted twice with 150uL elution buffer for 15minutes at 65C. Samples were treated with proteinase K at 55C for 1-2hrs then transfer to 65C overnight to reverse crosslinks. DNA was cleaned up Qiagen PCR purification kit and concentrated using by Speed vac.
Worm_LM-PCR_Amplification_for_ChIP-chip_vSS2. ChIP DNA was amplified with a modified ligation mediated PCR (LM-PCR) protocol derived from FlyChip protocol version 1.2 from R. Auburn: http://www.flychip.org.uk/protocols/chip/lm_pcr.php. For a detailed protocol see http://www.modencode.org/.
|
| Label |
Cy5 dye
|
| Label protocol |
ChIP-chip_label_hyb_nimblegen_v1. DNA was labeled and hybridized to C. elegans tiling array by Roche NimbleGen according to the protocol described in chapter 3 and 4 of the NimbleGen Arrays User?s Guide ChIP-chip Analysis, Version 3.1, 27 May 2008. Briefly, Amplified IP or input DNA was either labeled with Cy5 or Cy3 in the presence of Klenow fragment. The reaction was stopped by the addition of EDTA. Labeled DNA was recovered by isopropanol precipitation, and dried. The labeled DNA was hybridized to C. elegans tiling array for 16 - 20 hours at 42°C.
|
| |
|
| Channel 2 |
| Source name |
UP07442_H3K9ME3_N2_EEMB_1 extraction1_array1 channel_2
|
| Organism |
Caenorhabditis elegans |
| Characteristics |
strain: N2
developmental stage: Early Embryo
genotype: wild type
sex: mixed Male and Hermaphrodite population
|
| Growth protocol |
Worm_embryo_growth_and_harvest_vSS3. Embryos were prepared by bleaching from gravid N2 adults grown in standard S-basal media liquid culture. Live embryos were cross-linked in M9 + 1.85 % formaldehyde for 30 minutes at room temperature. Embryos were then washed twice with M9 Buffer, once with 100 mM Tris-HCl pH 7.5 and once with FA buffer (50 mM HEPES/KOH pH 7.5, 1 mM EDTA, 1% Triton X-100, 0.1% sodium deoxycholate, 150 mM NaCl). Pellets were frozen at -80C. For a detailed protocol see http://www.modencode.org/.
|
| Extracted molecule |
genomic DNA |
| Extraction protocol |
Worm_embryo_extraction_vSS2. Embryos were resuspended in FA buffer (50 mM HEPES/KOH pH 7.5, 1mM EDTA, 1% Triton X-100, 0.1% sodium deoxycholate; 150 mM NaCl) + protease inhibitors. Sample was dounced 30 times using tight pestle at 4ºC, then sonicated 9 times on ice at the following settings: 30 sec; power output 3; 70% duty cycle. Cell debris was removed by centrifuging at 13,000 rpm for 15 minutes at 4ºC and taking the supernatant. Supernatants were filtered through Millipore Ultrafree-MC 0.45 ?m filter units (cat. UFC30HV0S) at 13,000 rpm, 4°C for 1 minute to remove lipids. Protein concentration was determined, and extracts were aliquoted and stored at -80ºC. For a detailed protocol see http://www.modencode.org/.
Worm_chromatin_immunoprecipitation_v5. 2mg extract + 1%sarkosyl was used for each ChIP with 10% taken as input directly into elution buffer (1% SDS in TE, 250 mM NaCl) and treated with RNAse. Antibody was added to each IP sample and incubated overnight at 4C. Immune complexes were incubated (2hrs at 4C) with 50 ul of IgG dynabeads (Dyna), and washed 5 minutes with 1.5mL of each of the following solutions: ChIP Buffer, ChIP Buffer+1M NaCl, ChIP Buffer+500mM NaCl, TEL Buffer (10mM Tris-HCl pH 8.0, 250mM LiCl, 1% NP-40, 1% sodium deoxycholate, 1mM EDTA), and 2X TE (10mM Tris-HCl pH 8.0, 1mM EDTA). Samples were eluted twice with 150uL elution buffer for 15minutes at 65C. Samples were treated with proteinase K at 55C for 1-2hrs then transfer to 65C overnight to reverse crosslinks. DNA was cleaned up Qiagen PCR purification kit and concentrated using by Speed vac.
Worm_LM-PCR_Amplification_for_ChIP-chip_vSS2. ChIP DNA was amplified with a modified ligation mediated PCR (LM-PCR) protocol derived from FlyChip protocol version 1.2 from R. Auburn: http://www.flychip.org.uk/protocols/chip/lm_pcr.php. For a detailed protocol see http://www.modencode.org/.
|
| Label |
Cy3 dye
|
| Label protocol |
ChIP-chip_label_hyb_nimblegen_v1. DNA was labeled and hybridized to C. elegans tiling array by Roche NimbleGen according to the protocol described in chapter 3 and 4 of the NimbleGen Arrays User?s Guide ChIP-chip Analysis, Version 3.1, 27 May 2008. Briefly, Amplified IP or input DNA was either labeled with Cy5 or Cy3 in the presence of Klenow fragment. The reaction was stopped by the addition of EDTA. Labeled DNA was recovered by isopropanol precipitation, and dried. The labeled DNA was hybridized to C. elegans tiling array for 16 - 20 hours at 42°C.
|
| |
|
| |
| Hybridization protocol |
ChIP-chip_label_hyb_nimblegen_v1. DNA was labeled and hybridized to C. elegans tiling array by Roche NimbleGen according to the protocol described in chapter 3 and 4 of the NimbleGen Arrays User?s Guide ChIP-chip Analysis, Version 3.1, 27 May 2008. Briefly, Amplified IP or input DNA was either labeled with Cy5 or Cy3 in the presence of Klenow fragment. The reaction was stopped by the addition of EDTA. Labeled DNA was recovered by isopropanol precipitation, and dried. The labeled DNA was hybridized to C. elegans tiling array for 16 - 20 hours at 42°C.
|
| Scan protocol |
ChIP-chip_scanning_nimblegen_v1. Array scanning and raw data extraction were performed at Roche NimbleGen, according to the protocol described in chapter 5 and 6 of the NimbleGen Arrays User?s Guide ChIP-chip Analysis, Version 3.1, 27 May 2008. Briefly, array signal was scanned by using a GenePix 4000B Scanner with associated software and saved as .tif files of the 532nm and 635nm images individually. Raw signal intensities of the images were extracted and saved as .pair files by using NimbleScan software according to the NimbleScan v2.4 User?s Guide.
|
| Description |
channel ch1 is input DNA;
channel ch2 is ChIP DNA; Antibody information listed below: official name: C. elegans UP07442 H3K9ME3 rabbit polyclonal antibody;target name: Trimethylated Lys-9 on histone H3;host: Rabbit;antigen: synthetic 2X-branched peptide containing the sequence AR[me3K]ST in which me3K corresponds to trimethyl-lysine at residue 9 of human Histone H3;clonal: Polyclonal;purified: Protein A/G;company: Upstate;catalog: UP07442;short description: A protein A purified rabbit polyclonal antibody to H3K9me3 obtained from Upstate (H3K9me3-07442);used for ChIP.;
|
| Data processing |
ChIP-chip normalization standard nimblegen:JL:1 protocol. ChIP-chip_normalization_standard_nimblegen_v1. The log2-ratio ratio of intensity from sample/reference channel was scaled to center the ratio data around zero by subtracting the bi-weight mean for the log2-ratio values for all features on the array from each log2-ratio value. This was performed using NimbleScan software according to the NimbleScan v2.4 User?s Guide and chapter 6 of the NimbleGen Arrays User?s Guide ChIP-chip Analysis (version 3.1, 27 May 2008) at Roche NimbleGen. Processed data are obtained using following parameters: genome version is WS180
ChIP-chip normalization standard nimblegen:JL:1 protocol. ChIP-chip_normalization_standard_nimblegen_v1. The log2-ratio ratio of intensity from sample/reference channel was scaled to center the ratio data around zero by subtracting the bi-weight mean for the log2-ratio values for all features on the array from each log2-ratio value. This was performed using NimbleScan software according to the NimbleScan v2.4 User?s Guide and chapter 6 of the NimbleGen Arrays User?s Guide ChIP-chip Analysis (version 3.1, 27 May 2008) at Roche NimbleGen. Processed data are obtained using following parameters: genome version is WS180
|
| |
|
| Submission date |
Jul 05, 2010 |
| Last update date |
Feb 02, 2015 |
| Contact name |
DCC modENCODE |
| E-mail(s) |
help@modencode.org
|
| Phone |
416-673-8579
|
| Organization name |
Ontario Institute for Cancer Research
|
| Lab |
modENCODE DCC
|
| Street address |
MaRS Centre, South Tower, 101 College Street, Suite 800
|
| City |
Toronto |
| State/province |
Ontario |
| ZIP/Postal code |
M5G 0A3 |
| Country |
Canada |
| |
|
| Platform ID |
GPL8537 |
| Series (1) |
|
| Relations |
| Named Annotation |
GSM562692_UP07442_H3K9ME3_N2_EEMB_1.wig.gz |
| Supplementary file |
Size |
Download |
File type/resource |
| GSM562692_UP07442_H3K9ME3_N2_EEMB_1.wig.gz |
9.0 Mb |
(ftp)(http) |
WIG |
| GSM562692_UP07442_H3K9ME3_N2_EEMB_1_13853601_532.pair.gz |
37.7 Mb |
(ftp)(http) |
PAIR |
| GSM562692_UP07442_H3K9ME3_N2_EEMB_1_13853601_635.pair.gz |
37.9 Mb |
(ftp)(http) |
PAIR |
| Processed data provided as supplementary file |
|
|
|
|
 |
