Low-Tortuosity Water Microchannels Boosting Energy Utilization for High Water Flux Solar Distillation

Environ Sci Technol. 2020 Apr 21;54(8):5150-5158. doi: 10.1021/acs.est.9b06072. Epub 2020 Apr 1.

Abstract

Solar distillation through photothermal evaporators has approached solar light energy (E1) limit under no solar concentration but still suffers from modest vapor and clean water production. Herein, a nature-inspired low-tortuosity three-dimensional (3D) evaporator is demonstrated to significantly improve water production. The solar evaporator, prepared from polypyrrole-modified maize straw (PMS), had upright vascular structures enabling high water lifting and horizontal microgaps facilitating broad water distribution to the out-surface. Consequently, this novel PMS evaporator dramatically enhanced the utilization of the solar heat energy stored in the environment (E2) for promoting evaporation. The maximum vapor generation rate of a single PMS respectively increases 2.5 and 6 times compared with the conventional 3D evaporators and the planar evaporators of an identical occupied area. Consequently, a scaled-up PMS array achieved a state-of-the-art vapor generation rate of 3.0 L m-2 h-1 (LMH) under a simulated condition and a record-high clean water production of 2.2 LMH for actual seawater desalination under natural conditions (1 sun intensity). This breakthrough reveals great potentials for cost-effective freshwater production as well as the rational design of high-performance photothermal evaporators for solar distillation.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Distillation*
  • Polymers
  • Pyrroles
  • Water
  • Water Purification*

Substances

  • Polymers
  • Pyrroles
  • Water